NHTSA Recall Number:  89V006000
Recall Date:  17 January 1989

SUMMARY
FUEL INJECTION SEALS MAY HARDEN, DUE TO HIGH TEMPERATURE AND ALCOHOL IN SOME FUELS, AND ALLOW FUEL TO ESCAPE INTO THE ENGINE COMPARTMENT.

CONSEQUENCE
FUEL DRIPPING ONTO HOT ENGINE COMPONENTS COULD CAUSE ANENGINE COMPARTMENT FIRE.

REMEDY
FUEL DRIPPING ONTO HOT ENGINE COMPONENTS COULD CAUSE ANENGINE COMPARTMENT FIRE.

MANUFACTURER NOTES
SYSTEM: FUELVEHICLE DESCRIPTION: PASSENGER CARS WITH TURBO.

NHTSA Recall Number:  87V157000
Recall Date:  06 October 1987

SUMMARY
REPEATED TOPPING OFF OF FUEL TANK DURING REFUELING REDUCES THE EXPANSION SPACE WITHIN THE TANK ALLOWING VAPORS TO ESCAPE FROM THE CHARCOAL FILTER TO OUTSIDE RATHER THAN BEING INDUCTED INTO THE ENGINE.

CONSEQUENCE
ESCAPING VAPORS COULD IGNITE BY HEAT EMITTED BY THEEXHAUST SYSTEM.

REMEDY
ESCAPING VAPORS COULD IGNITE BY HEAT EMITTED BY THEEXHAUST SYSTEM.

MANUFACTURER NOTES
SYSTEM: FUEL TANKVEHICLE DESCRIPTION: TURBO AND TURBO QUATTRO PASSENGER CARS.

NHTSA Recall Number:  87V008000
Recall Date:  03 January 1987

SUMMARY
SUDDEN ACCELERATION FROM A STATIONARY POSITION MAY OCCUR, WHEN SHIFTING FROM PARK TO REVERSE OR DRIVE.

CONSEQUENCE
UNEXPECTED SUDDEN ACCELERATION WITHOUT PRIOR WARNINGCOULD RESULT IN A VEHICLE CRASH, CAUSING INJURIES.

REMEDY
UNEXPECTED SUDDEN ACCELERATION WITHOUT PRIOR WARNINGCOULD RESULT IN A VEHICLE CRASH, CAUSING INJURIES.

MANUFACTURER NOTES
SYSTEM: TRANSMISSION LINKAGE.VEHICLE DESCRIPTION: PASSENGER VEHICLES WITH AUTOMATIC TRANSMISSION.

NHTSA Recall Number:  85V099000
Recall Date:  30 July 1985

SUMMARY
UNDER ADVERSE WEATHER CONDITIONS, OUTER RUBBER LAYER OF BRAKE HOSES MAY BECOME BRITTLE AND DEVELOP CRACKS. CONSEQUENCE OF DEFECT: CRACKS COULD LEAD TO LOSS OF BRAKE FLUID RESULTING IN AN INCREASE IN STOPPING DISTANCE AND POSSIBLY AN ACCIDENT.

CONSEQUENCE

REMEDY

MANUFACTURER NOTES
VEHICLE DESCRIPTION: PASSENGER CARS. SYSTEM: DISC BRAKE HOSE.

NHTSA Recall Number:  96E006000
Recall Date:  04 March 1996

SUMMARY
THESE BRAKE HOSE ASSEMBLIES HAVE INADEQUATE CRIMPS ATTACHING THE HOSE TO THE HOSE FITTINGS AND COULD CAUSE THE HOSE AND FITTING TO SEPARATE.

CONSEQUENCE
IF THE BRAKE HOSE ASSEMBLY SEPARATES, LOSS OF BRAKING POWER CAN OCCUR INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.

REMEDY
IF THE BRAKE HOSE ASSEMBLY SEPARATES, LOSS OF BRAKING POWER CAN OCCUR INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.

MANUFACTURER NOTES
SYSTEM: BRAKES; HYDRAULIC; LINES; HOSES.EQUIPMENT DESCRIPTION: AFTERMARKET BRAKE HOSE ASSEMBLIES, MODEL SP6957, FOR USE ON 1983 THROUGH 1986 AUDI 5000 VEHICLES. NOTE: THE VEHICLE OWNER SHOULD IMMEDIATELY RETURN THE VEHICLE TO THE SERVICE FACILITY WHICH PERFORMED THE INSTALLATION AND THE INSTALLER SHOLD REMOVE THE BRAKE HOSE ASSEMBLY AND REPLACE IT WITH ASSEMBLY SP9037. EIS WILL REMEDY THE DEFECT WITHOUT CHARGE TO THE OWNER FOR THE REPLACEMENT OF THE DEFECTIVE PARTS AND WILL PAY THE INSTALLING FACILITY FOR ITS PURCHASE COST OF THERE PLACEMENT PART (A COPY OF THE PURCHASE INVOICE WILL BE NEEDED) PLUS A LABOR CHARGE. OWNERS OR INSTALLERS CAN CONTACT EIS AT 129 WORTHINGTON RIDGE, BERLIN, CONNECTICUT 06037, ATTN. D. J. DUPREY, QUALITY ASSURANCE MANAGER, OR CALL1-203-828-8290. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

NHTSA Recall Number:  87V170000
Recall Date:  28 October 1987

SUMMARY
MALFUNCTIONS OF INTERNAL COMPONENTS OF IDLE CONTROL UNIT COULD CAUSE IDLE STABILIZER VALVE TO BECOME ACTIVATED OUTSIDE ITS NORMAL OPERATING RANGE.

CONSEQUENCE
IDLE RPM MAY BECOME ERRATIC AND, IN SOMEINSTANCES,INCREASE.

REMEDY
IDLE RPM MAY BECOME ERRATIC AND, IN SOMEINSTANCES,INCREASE.

MANUFACTURER NOTES
SYSTEM: IDLE CONTROL UNITVEHICLE DESCRIPTION: 1984 5000S, 1984 AND 1985 TURBO PASSENGER CARS EQUIPPEDWITH AUTOMATIC TRANSMISSION.